Residential Soundbars, Subtle aesthetics, outrageous sound

Choose Your width

Manufactured to exact specification, tell us your TV model and we will match the width perfectly for that seamless, bespoke look.

Our Soundbars can be made for TVs from 50″ to 85″ and beyond.

Choose your Grill

With a comprehensive range of acoustic fabrics to choose from you can choose to make a statement or blend into an any colour scheme or decor. 

Below is just a small sample of the range PHON can offer. 

Choose Cinema or Stereo

There are two versions to choose from, our LR or LCR,

The LR

The LR is active and is perfect just on it’s own, simply plug into any TV via HDMI ARC the volume is then controlled by the TV’s remote. 


The LCR is a 3 channel (Left, Centre, Right) soundbar designed to be used as part of a subtle but powerful cinema setup. The soundbar is passive and connects to any surround sound receiver. You can also add a matching Subwoofers and mini rear surround speakers.

Choose your surround finish

Choose a real wood veneer or a hand painted finish for that built in look and feel with any Farrow & Ball colour to match your interior.

High End Audiophile quality components


The LR comprises of the following components:

2x – Soft dome tweeters

2x – 4″ midrange drivers

2x – 6″ Low end drivers

2x – 5 x 8″ Passive Radiators

Built in amplifier

  • HDMI Arc
  • DSP via app interface
  • Spotify connect


The Passive LCR comprises of the following components:

3x – Soft dome Tweeter

3x – 4″ Midrange drivers

4x – 6″ Low frequency drivers

PHON Drivers:

  • Vented cast aluminum chassis for optimum strength and low compression
  • Proprietary cone material with natural fibers made in-house
  • Soft low damping rubber surround for transient response
  • Non-conducting fiber glass voice coil former for minimum damping
  • Extended copper sleeve on pole piece for low inductance and low distortion
  • Vented coil former
  • CCAW voice coil for reduced moving mass
  • Long life silver lead wires
  • Vented pole piece for reduced compression


Enclosure Alignment4-way bass reflex / acoustic suspension
Driver complimentDPC-Array:
28mm Beryllium
28mm(2) Textreme TPCD

180mm(4) Textreme TPCD

Sensitivity92.2dB / 2.83v / 1.0m
Impedance4Ω nominal / 3.2Ω min
Frequency Response (+/-1.5dB)80 – 20kHz
Frequency Response (-10dB)Bass reflex: 22 – 37kHz
Acoustic suspension: 32 – 37kHz
Typical In Room bass extensionBass reflex: 16Hz
Acoustic suspension: 23Hz
Dimensions (HxWxD)1295 x 240 x 400mm
51.0 x 9.5 x 15.7″
Weight55.7 kg (122.5 lbs.)
Recommended Amplifier Power100 – 600W RMS
SPL capability (100-20kHz)117dB peak <2% – 2nd, 3rd Harmonics

Start your order

Prices start from £3800.

This includes Soundbar (LR), Oak Veneer Surround, Choice of any Grill cloth, and a width to suit a 55″ TV

All Soundbars are made to order with a 6-8 week lead time.

Just want to know more

Fill out the form below or email us [email protected]